Shop tips · Lease return

Returning a lease? Fix the right things first.

The turn-in inspection decides how big your final bill is. Here's what leasing companies charge for, what's worth repairing first, and what to leave alone.

Quick answer: Get the leasing company's pre-return inspection a month or two before turn-in, then fix only what's on that report and costs less to repair than to pay for. That's usually dents bigger than a credit card, scratches through the paint, cracked bumpers, and glass damage. Leave normal wear alone. You aren't charged for it, so fixing it is money spent for nothing.

How lease-end charges work

When you turn in a leased car, an inspector walks around it and logs anything beyond "normal wear and use." Each item gets priced from the leasing company's own rate sheet, and the bill usually shows up weeks later, after the car is gone and it's too late to fix anything yourself.

What counts as normal is spelled out in your lease agreement and the leasing company's wear-and-use guide. Most brands publish one, and many include a printable gauge for measuring dents and scratches. Find yours before you do anything else.

What to fix, and what to leave

Usually worth fixing

  • Dents larger than a credit card, with or without paint damage
  • Scratches that catch a fingernail or show primer or metal
  • Cracked, split, or torn bumper covers
  • Windshield chips bigger than a quarter, and any crack
  • Broken lights, mirror housings, or trim pieces
  • Past repairs that don't match: off-color paint, overspray, rough texture

Usually leave alone

  • Door dings smaller than a credit card
  • Light surface scratches that polish out
  • A few small stone chips on the hood and bumper
  • Swirl marks and normal wash wear
  • Anything the pre-inspection report doesn't list

Thresholds are typical of published lease wear guides. Every leasing company sets its own, so check yours.

The game plan

  1. Book the pre-return inspection earlySchedule it 60 to 90 days before your lease ends. Many leasing companies offer one at no cost, and you get a written report of exactly what they'd charge.
  2. Bring us the reportWe'll look at the same items and give you a free written estimate, line by line, so you can compare our price to theirs.
  3. Fix only what saves you moneySome charges are cheaper to just pay. If that's the case, we'll tell you. You only fix the items where the repair costs less than the charge.
  4. Repair it like the factory didA bad repair gets charged too. We color-match the paint and blend it into the next panel, so there's nothing for the inspector to find.
  5. Document the turn-inWash the car, photograph every panel in daylight, keep your repair invoice, and get a signed copy of the condition report when you drop it off.

How to approach the dealer

  • Check what you already paid for. If you bought lease-end or wear-and-tear protection, read it before you repair anything. It may already cover the charges.
  • Ask about allowances and waivers. Some leasing companies forgive a set amount of wear, and some waive fees if you lease or buy your next car from the same brand. Ask before you sign the next deal, not after.
  • Get the report in writing. If an item shows up on the final bill that wasn't on the pre-inspection, ask for photos of it. Your own dated photos and repair invoice are your proof.
  • Don't cover damage with a touch-up pen. A visible blob of paint still reads as damage, and it can make a proper repair cost more.

Leased fleet vans too

Delivery vans and fleet vehicles go through the same kind of return inspection, often across a whole group of vehicles at once. We handle fleet turn-in repairs for DSPs and local fleets. See fleet and DSP repair.

Not sure what's chargeable? Drive in or send a few photos. We'll give you a straight answer on what's worth fixing and what isn't.

Turn it in clean. Keep your money.

Free estimates at 40923 Albrae St in Fremont. Mon–Fri 8am–6pm, Sat 8am–1pm, Sun by appointment.